Abstract
Abstract In preparation for operations at the HL-LHC, the CMS Collaboration is upgrading its endcap calorimeters with a high granularity calorimeter (HGCAL). The HGCAL back-end electronics includes two Non-Zero Suppression (NZS) boards, which dynamically disable zero-suppression in designated regions of interest. This paper presents a detailed discussion of the principal components of the implemented NZS firmware and a comprehensive account of the hardware testing performed on the Serenity platform, including validation against a Python-based emulator. Each of the 48 DAQ (Data Acquisition) boards of a single endcap receives 432-bit NZS flags, which are generated non-zero-suppression control flags to disable zero suppression for designated regions of interest on the front-end sections and sent via high-speed output channels operating at 25 Gbps. The NZS firmware processes data from six EMTF input links operating at 25 Gbps, and produces the necessary non-zero suppression control flags for real-time selection and spatial mapping of up to 27 muon candidates per bunch crossing under a 360 MHz system clock constraint. To meet the stringent timing requirements, the design adopts a fully pipelined FPGA architecture, enabling deterministic latency while sustaining continuous high-throughput operation.