Abstract
Frictional heating makes detrimental eects on surrounding tissue and lubricant around the articial hip joint. For reduction of this thermal damage, testing parameters and their eects were investigated by using the Taguchi method and analysis of variance. Ultra high molecular weight polyethylene (UHMWPE) acetabular liners and CoCrMo femoral head articial hip joint components were used as samples. Frictional heating measurements of the joints were carried out on a custom made hip joint friction experimental setup. Surface dimples in dierent sizes were machined on the inner surface of acetabular insert samples. The tests were conducted under dierent loading conditions with dierent testing time. Bovine calf serum was used as lubricant with dierent amount of third body wear particles in it. Temperature rise in acetabular and femoral component was recorded with embedded thermocouples. The experimental results demonstrated that the surface dimples were the major parameter on frictional heating, followed by applied load, amount of third body particles and time. The optimal combination of the testing parameters was predicted and validated by doing experiments.